Polyester-Coated Color Aluminum Coil
Key Specifications (Table)
Polyester-coated color aluminum coil specifications are customized according to application scenarios and processing requirements. The main specifications are shown in the following table:
|
Specification Category |
Detailed Parameters |
Typical Applications |
Quality Control Requirements |
|
Substrate Thickness |
Thin: 0.15mm - 0.3mm |
Home appliance panels (refrigerator side panels, washing machine covers), thin signage |
Thickness deviation ≤±0.02mm, good flexibility |
|
Medium: 0.3mm - 1.2mm |
Architectural decoration (ceiling panels, wall cladding, door panels), advertising light boxes |
Thickness deviation ≤±0.03mm, flat surface without waves |
|
|
Thick: 1.2mm - 3.0mm |
Transportation parts (automotive trim, trailer panels), outdoor billboards, cabinet frames |
Tensile strength ≥150MPa, good stamping performance |
|
|
Coating Parameters |
Thin Coating: Total thickness 20-30μm (primer 5-8μm, topcoat 15-22μm) |
Indoor decoration (interior wall panels, furniture panels), small home appliances |
Adhesion ≥4B, pencil hardness ≥2H |
|
Standard Coating: Total thickness 30-40μm (primer 8-10μm, topcoat 22-25μm) |
Outdoor architectural decoration, medium-sized home appliances, signage |
Color difference ΔE ≤1.5, neutral salt spray test ≥500h |
|
|
Thick Coating: Total thickness 40-50μm (primer 10μm, topcoat 25-30μm, backcoat 5-10μm) |
Harsh environment applications (coastal architectural cladding, industrial workshop walls) |
Neutral salt spray test ≥1000h, weather resistance test ≥2000h |
|
|
Width & Length
|
Standard Width: 1000mm, 1220mm, 1500mm, 1600mm |
Batch production of architectural materials, home appliances, and signage |
Width deviation ≤±0.5mm, no edge warping |
|
Custom Width: 500mm - 1600mm; Length: 50-3000kg/roll |
Special-sized architectural projects, customized home appliances, and transportation parts |
Uniform coil tension, no creases or scratches |
|
|
Alloy Types
|
1050/1060 Alloy (≥99.5% Al) |
Indoor decoration, home appliances, and low-stress applications |
Excellent ductility, easy to process into complex shapes |
|
3003 Alloy (with Mn 1.0-1.5%)/5052 Alloy (with Mg 2.2-2.8%) |
Outdoor decoration, transportation parts, and high-stress applications |
Enhanced corrosion resistance and tensile strength |
Advantages Over Alternative Materials
Compared with traditional decorative materials such as steel plates, wood, and ceramic tiles, polyester-coated color aluminum coil has obvious comprehensive advantages:
|
Alternative Material |
Advantages of Polyester-Coated Color Aluminum Coil |
Key Reason |
|
Galvanized Steel Plate |
Lighter weight (1/3 of steel), better corrosion resistance, richer colors, and no rust |
Galvanized steel is prone to rust after the zinc layer is damaged; aluminum substrate has natural corrosion resistance, and the polyester coating enhances protection. |
|
Solid Wood |
No deformation, no moth-eaten, water-resistant, fire-resistant, and longer service life (15-20 years vs. 5-10 years of wood) |
Wood is easily affected by moisture and temperature, leading to deformation and moth-eaten; polyester-coated aluminum is stable in physical properties and not affected by the environment. |
|
Ceramic Tile |
Lighter weight (reduces building load), easier to install (no need for cement bonding), and better formability (can be bent) |
Ceramic tile is heavy and brittle, easy to break during transportation and installation; it cannot be processed into curved shapes. |
|
PVDF-Coated Aluminum Coil |
Lower cost (about 30-50% of PVDF), sufficient performance for general applications, and more color options |
PVDF coating has better weather resistance but higher cost; polyester coating meets the needs of most non-harsh environment applications at a lower cost. |
Detail Image
-
Detail1
-
-
Detail Image
-
Detail1
-
